How to Choose a Visitor Management System for an NZ Workplace

To choose a visitor management system, start with your own site, not a feature list. Work out who visits, what you need to know about them, and what they need to know before they go further than reception. Then test each shortlisted system against those requirements in a live demonstration.

There is no single best visitor management system for every workplace. A quiet professional office and a busy manufacturing site have different visitors, hazards and reception arrangements. This guide gives you a structured way to find the right fit.

If you are new to the topic, read what a cloud-based visitor management system is first.

Visitor using a visitor management system at an NZ workplace reception.

Step 1: List who actually visits your workplace

Spend a week noting everyone who arrives who is not an employee. Most workplaces find more variety than they expected.

Visitor typeTypical visitWhat usually matters
Clients and guestsShort, hosted, office areasQuick sign-in, host told promptly
Contractors and tradesHours or days, operational areasSite rules, hazards, time on site
Couriers and deliveriesMinutes, loading areaSpeed, minimal data
Job candidatesShort, hostedDiscretion, a good first impression
Auditors and inspectorsHours, wide accessAccurate record of the visit
Regular visitorsRepeat visitsNot re-entering details every time

Note volumes as well. Ten visitors a week and a hundred a day call for different setups. For contractor-heavy sites, see managing site access for contractors.

Step 2: Decide what information you need at check-in

Collect what you have a clear reason to collect, and no more. The Privacy Act 2020 requires organisations to collect personal information only for a lawful purpose connected with what they do, and only where the information is necessary for that purpose.

For each visitor type, write down:

  • the details you need, such as name, organisation, host and contact number
  • any declaration or acknowledgement they must complete
  • whether you need a sign-out time as well as a sign-in time
  • what you will tell visitors about why you are collecting it

A courier dropping a parcel should not face the same form as a contractor working at height. A system that lets you tailor forms by visitor type avoids over-collecting from some people and under-informing others.

Step 3: Compare sign-in workflows

The same system can feel very different depending on how visitors check in. Consider which workflows suit your entrance.

WorkflowSuitsCheck before choosing
Tablet or kiosk at receptionStaffed or unstaffed front desksSpace, power, connection, accessibility
QR code scanned on the visitor’s phoneSites with no reception, multiple entrancesMobile coverage, visitors without smartphones
Pre-registration before arrivalPlanned visits and contractor workWho creates the booking and how the visitor is told
Staff-assisted sign-inVisitors who need helpReception workload at busy times

Most workplaces need more than one. Ask each supplier which workflows are included and whether they can run side by side.

Step 4: Evaluate notifications, visibility and reporting

Three functions do most of the day-to-day work.

  • Host notifications. When a visitor signs in, is the host told automatically? Ask how the message is sent and what happens if the host is away.
  • Live visibility. Can you see who is on site right now? This matters most in an emergency, when you need to account for visitors as well as staff.
  • History and reporting. Can you look up who visited, when they arrived and left, and what they acknowledged?

Ask to see each of these working, not described on a slide.

Get Started Today

Upgrade your workforce management with CleverTime’s Systems Solutions

Step 5: Consider accessibility, privacy and administration

Accessibility

Check the height and position of any fixed device, text size and contrast, and whether the process works for someone who cannot use a touchscreen. Always keep a staff-assisted alternative.

Privacy and data handling

Visitor records are personal information. Ask each supplier:

  • Where is visitor data stored, and is any of it held outside New Zealand?
  • Who within your business can see or export it?
  • Can you set how long records are kept before deletion?
  • How would a visitor’s request to see or correct their information be handled?

The Privacy Act also says personal information should not be kept longer than it is needed, so decide your retention period before you go live. The Office of the Privacy Commissioner publishes guidance on the privacy principles.

Staff administration

Someone has to maintain forms, hosts and sites. Ask who can make changes, how long a simple change takes, and what support is available.

Step 6: Match inductions to your site

Under the Health and Safety at Work Act 2015, a business must look after the health and safety of other people at the workplace, including visitors. WorkSafe describes this as providing an appropriate and proportionate level of health and safety information and protection, and making sure emergency plans include visitors. See WorkSafe’s guidance on other persons at work.

What that looks like depends on your hazards. An office visitor might need only the evacuation point. A contractor entering a production area may need site rules, hazard information and PPE requirements.

When evaluating a system, check whether you can:

  • show different induction content to different visitor types
  • record that the visitor acknowledged it
  • update content yourself when the site changes

A visitor management system records and delivers this information. It does not make a workplace compliant on its own. For background, read CleverTime’s overview of NZ health and safety visitor obligations.

Supplier evaluation checklist

Use the same checklist for every supplier so the comparison is fair.

  • ☐  Supports the sign-in workflows we need
  • ☐  Forms can be tailored by visitor type
  • ☐  Declarations and acknowledgements can be collected at sign-in
  • ☐  Hosts are notified automatically on arrival
  • ☐  A live list shows who is on site, and is reachable in an emergency
  • ☐  Sign-in and sign-out times are recorded
  • ☐  Visit history can be searched and reported
  • ☐  Works across all our sites
  • ☐  Data storage location, access controls and retention are clear
  • ☐  Accessible, with an assisted alternative
  • ☐  We can update forms and content ourselves
  • ☐  Hardware requirements are clear
  • ☐  Pricing structure, contract terms and support hours are provided in writing
  • ☐  Fits with other systems we use, such as staff time and attendance

What to test during a demonstration

Ask the supplier to run your scenarios, not theirs.

  1. Sign in as a first-time contractor and complete an induction.
  2. Sign in as a returning visitor. Is it faster?
  3. Pre-register a visitor, then arrive as that visitor.
  4. Watch the host notification arrive.
  5. Open the live on-site list from a phone, as you would at an assembly point.
  6. Sign out, then find the visit in the history.
  7. Change a form field or an induction message.
  8. Ask what happens if the internet connection drops.

Time each sign-in. If the process is slow or confusing in a demonstration, it will be worse on a busy morning.

When CleverTime may suit your workplace

CleverTime’s visitor management system is cloud-based. According to CleverTime, visitors can register using a kiosk, tablet or mobile device, with QR code and pre-registration options. Hosts can be notified automatically when a visitor arrives. You can view a live list of visitors currently checked in, access check-in and check-out timestamps, and customise forms to collect declarations and health and safety acknowledgements. It can be used at one office or across multiple locations.

It may be a good fit if you want visitor sign-in from the same provider as your employee time and attendance. As with any supplier, run the demonstration tests above against your own requirements.

Frequently asked questions

What is the best visitor management system in NZ?

It depends on your visitors, your hazards and how your entrance is staffed. Define your requirements first, then compare suppliers against the same checklist.

Does New Zealand law require a visitor sign-in system?

The Health and Safety at Work Act 2015 does not prescribe a particular sign-in method. It requires a business to look after the health and safety of others at the workplace so far as is reasonably practicable. Knowing who is on site and what they have been told supports that.

How long should we keep visitor records?

The Privacy Act 2020 says personal information should not be kept longer than it is needed for the purpose it was collected for. Set a retention period that reflects your purpose and any other obligations, and take advice if unsure.

Can contractors and visitors use the same system?

Often, yes, with different forms and induction content for each group. Check that the system lets you tailor the process by visitor type.

See how it would work at your site

To talk through your visitor types and sign-in requirements, contact CleverTime.

Scroll to Top