How to Install a Time Clock System: A Business Setup Checklist

Installing a time clock system is mostly a planning job. The physical part, such as mounting a clock or handing out a mobile app, is usually quick. What takes time is deciding where people clock, enrolling them, agreeing the rules the system will apply, and testing the results before payroll depends on them.

This guide assumes you have already selected a system. If you are still comparing options, start with how to choose the right time clock system and the different types of time clock systems.

It is a general planning checklist, not a manufacturer’s installation manual. Always follow the instructions that come with your own system.

Technician checking a time clock system installation at a warehouse entrance.

Step 1: Confirm what the system needs to do

Write down the requirements before anything is configured. A short list keeps setup decisions consistent and gives your supplier something concrete to work from.

  • How many employees will clock, and at how many sites?
  • Which groups work fixed hours, shifts, or in the field?
  • Do you need to record breaks, and which are paid or unpaid?
  • Does time need to be recorded against jobs, projects or clients?
  • Who approves hours, and by when each pay period?
  • Which payroll system will receive the approved hours?

Name one person as the project owner. They do not need to be technical, but they do need authority to settle questions about rules and responsibilities.

Step 2: Choose clocking locations and methods

Walk through each site at the start and end of a shift. Look for where people naturally arrive and leave, where queues could form, and whether lighting, dust, moisture or gloves could affect the method you have chosen.

Match the method to how each group works. Many businesses use more than one.

Work patternTypical clocking methodSetup question to answer
Fixed site with one main entranceWall-mounted or shared deviceWhere will it sit so staff pass it without detouring?
Large site with several entrancesMore than one clocking pointWhich entrance does each team use?
Field or mobile staffMobile appDo staff use work phones or their own, and is location recorded?
Office or remote staffBrowser-based clockingWhich devices and networks may be used?

CleverTime’s time clock system supports clocking through the CleverGo smartphone app, the CleverKiosk tablet app and biometric time clocks, so one business can combine methods across sites.

If any method uses fingerprint, palm or facial recognition, check your privacy obligations before you order hardware. The Biometric Processing Privacy Code applies to organisations that collect biometric information in New Zealand. See Step 4.

Step 3: Check connectivity, power and devices

Requirements differ between products, so ask your supplier for the specifications rather than assuming. Useful questions include:

  • Does each clocking point need Wi-Fi, a network cable or mobile data?
  • What happens to clockings if the connection drops?
  • How is each device powered, and is a suitable outlet already nearby?
  • Which phone or tablet operating systems does the app support?
  • Who installs software updates?
  • How should a wall-mounted device be fixed, and at what height for accessibility?

Test the signal at the exact spot where a device will sit. Coverage in an office can be very different from coverage beside a loading bay.

If a location needs a new power outlet or fixed wiring, use a licensed electrician. Do not attempt electrical work yourself. For network changes, involve whoever manages your IT.

 

Step 4: Enrol employees and set access permissions

Enrolment is where good data starts. Prepare a clean employee list before you load anyone into the system.

  1. Check names, employee numbers, sites and departments against payroll.
  2. Create each employee and assign them to the right group or site.
  3. Issue or register their clocking method, such as the app, a card or a biometric template.
  4. Confirm each person can clock successfully before they leave the session.

Then set permissions. Decide who can view timesheets, who can edit them, who approves, and who can change system settings. Keep editing rights to the people who need them.

If you are using biometrics

Tell employees what is being collected, why, how it is stored and who can access it, before you enrol them. The Office of the Privacy Commissioner’s biometrics guidance explains what organisations must assess, including whether biometric processing is necessary and proportionate and whether an alternative would do the job. Plan a non-biometric option for anyone who cannot use the biometric method.

Get Started Today

Upgrade your workforce management with CleverTime’s Systems Solutions

Step 5: Configure time-recording and approval rules

The system should reflect what your employment agreements and workplace policies already say. Setup is not the moment to introduce new rules by accident.

Agree and document:

  • standard start and finish times, or shift patterns
  • how paid rest breaks and unpaid meal breaks are recorded
  • when overtime or other pay rules apply
  • what counts as an exception, such as a missing clock-out
  • who corrects an exception and who approves the correction
  • the approval deadline for each pay period

Employment New Zealand sets out minimum rest and meal break entitlements by length of work period. Check your break settings against those entitlements and your agreements. If you are unsure how a rule should apply, get advice before configuring it.

Step 6: Test clock-ins, clock-outs, breaks and missing entries

Test with a few people before anyone relies on the data. Run each scenario and confirm what appears on the timesheet.

TestWhat to check
Normal clock-in and clock-outTimes and total hours are correct
Break start and endPaid and unpaid breaks are treated as agreed
Missing clock-outThe gap is flagged and a manager can correct it
Clocking twice in a rowThe duplicate is handled sensibly
Early or late clockingAgreed rules are applied as expected
Clocking at the wrong siteThe record shows where it happened
Connection lostYou know what staff should do and what is recorded
Manager correctionThe change is visible and approved by the right person
Hours passed to payrollTotals in payroll match the approved timesheet

Step 7: Run a pilot and train staff

Pick one team or site and run the new system for at least one full pay period. If you can, keep your existing method running alongside it and compare the two sets of hours. Differences will show you which rules or habits need attention.

Training can be short, but it should be specific.

  • Employees: how to clock in and out, how to record breaks, and what to do if they forget or the device is unavailable.
  • Supervisors: how to review exceptions, make or approve corrections, and meet the approval deadline.
  • Payroll: how approved hours reach payroll and what to check before each pay run.

Explain why the system is being introduced and how the records will be used. People adopt a change more readily when they understand it.

Go-live checklist

  • ☐  Requirements and project owner confirmed
  • ☐  Clocking locations and methods agreed for every group
  • ☐  Connectivity and power checked at each clocking point
  • ☐  Privacy obligations reviewed, including biometrics if used
  • ☐  Employee list checked against payroll and everyone enrolled
  • ☐  Permissions set for viewing, editing and approving
  • ☐  Break, overtime and exception rules configured and documented
  • ☐  All test scenarios passed
  • ☐  Pilot completed and differences resolved
  • ☐  Employees, supervisors and payroll trained
  • ☐  Fallback process agreed for outages or forgotten clockings
  • ☐  First live pay run scheduled with extra time for checking

After go-live, review exceptions weekly for the first month. A cluster of missing clock-outs in one team usually points to a location or training issue that is easy to fix early.

When to involve your supplier or an installer

You can do much of the planning yourself. Bring in help when:

  • pay rules, shift patterns or job structures are complex
  • you need the payroll connection configured or tested
  • hardware has to be mounted, cabled or powered
  • you are rolling out across several sites at once
  • test results do not match what you expected

Your supplier knows how its own product should be configured. Electrical and data cabling work belongs with appropriately licensed or qualified trades.

Frequently asked questions

How long does it take to set up a time clock system?

It depends on the number of sites, the clocking methods and how complex your pay rules are. Allow time for at least one full pay period as a pilot before relying on the system for payroll.

Can we install a time clock system ourselves?

Often you can handle planning, enrolment and training internally. Use your supplier for configuration questions and a licensed electrician for any new power or fixed wiring.

Should we run the old and new systems in parallel?

A parallel run for one pay period is a practical way to find differences before they affect pay. Keep it short so staff are not double-handling for long.

Do we need to tell employees before introducing biometric clocking?

Yes. Under New Zealand’s Biometric Processing Privacy Code, organisations must be open about the biometric information they collect and why. Read the Privacy Commissioner’s guidance and seek advice for your situation.

What records should the system produce?

New Zealand employers must keep wage and time records, including the hours worked each day in a pay period, for six years. Employment New Zealand’s record keeping page lists what is required. A time clock system can support this, but the obligation stays with the employer.

Talk to CleverTime about your setup

If you would like help working out which clocking options suit your sites and how to set them up, contact the CleverTime team.

Scroll to Top